LiPOLY’s high-conductivity, thermal EMI absorber, and non-silicone materials reduce thermal resistance and EMI risks for reliable 5G/6G and 800G/1.6T systems.
High-Speed Transmission and High-Density Integration Increase Thermal and Signal Management Challenges
Concentrated high-power chips, reduced component spacing, and high-frequency signal transmission make thermal management in networking equipment increasingly complex. Material selection must consider not only heat-transfer efficiency but also electromagnetic interference, optical cleanliness, and long-term contact stability.
01
Challenge
High Power Density
Rising power consumption in high-speed switching chips and RF components creates more concentrated local hot spots.
02
Challenge
High-Frequency Electromagnetic Interference
Dense integration of high-speed signals and high-frequency circuits makes electromagnetic interference more difficult to control.
03
Challenge
Optical Cleanliness Requirements
Optical communication components are sensitive to volatile substances, requiring materials that reduce the risk of optical-surface contamination.
04
Challenge
Stable Long-Term Operation
Networking equipment operates continuously for extended periods, requiring materials to maintain stable contact and thermal performance.
Thermal EMI Absorber Technology
Combining Efficient Heat Dissipation with EMI Control
LiPOLY thermal EMI absorber materials combine heat conduction and electromagnetic-wave absorption. While filling gaps between components and heat-dissipation structures, they help reduce EMI risks in specific frequency bands, providing high-frequency, high-density electronic modules with both thermal and wave-absorption functions.
Dual Thermal Conduction and Electromagnetic-Wave Absorption
Efficient Heat Transfer
Fills gaps between components and heat-dissipation structures, reducing interface thermal resistance and improving heat-transfer efficiency.
Electromagnetic-Wave Absorption
Absorbs electromagnetic energy in specific frequency bands to help reduce interference risks in high-frequency circuits.
Networking Equipment Applications
Thermal Materials for a Wide Range of High-Speed Networking and Communication Equipment
High-Speed Switches
Switch ASICs
PHY Chips
Optical Transceiver Modules
Power Management Modules
Enterprise Routers
Network Processors
Network Interface Modules
Power Supply Modules
High-Speed Transceiver Chips
5G and 6G Base Stations
RF Power Amplifiers
RF Transceiver Modules
Baseband Processing Modules
Power Conversion Modules
High-Speed Optical Modules
800G/1.6T Optical Transceiver Modules
DSP Chips
Lasers and Optical Engines
Silicon Photonics Modules
Why Choose LiPOLY?
Thermal Material Solutions That Balance Heat Dissipation and Reliability for High-Speed Networking Equipment
LiPOLY combines high-thermal-conductivity, electromagnetic-wave absorption, and non-silicone material technologies. To address the high power density, signal interference, and optical cleanliness requirements of high-speed networking equipment, we offer a broad selection of materials and customized technical support to help improve equipment reliability and shorten product development cycles.
windshield_heat_front
High-Performance Thermal Material Technology
High-thermal-conductivity pads rated up to 30.0 W/m·K reduce interface thermal resistance between high-power chips and heat-dissipation structures.
flash_off
Integrated Thermal Conduction and EMI Absorption
Combines thermal conduction and electromagnetic-wave absorption to help control EMI in high-speed network switches and high-frequency communication modules.
solar_power
Low-Outgassing Non-Silicone Materials
Reduces low-molecular-weight siloxane outgassing and contamination risks, making it suitable for optical communication modules and optically sensitive equipment.
cheer
Rapid Custom Development
Supports customized thicknesses, dimensions, hardness levels, and formulations, with samples available in as little as three days to accelerate product development and validation.
Thermal Materials for 5G, 6G, Network Switches, and Optical Modules
Related Product Solutions
Ultra-High Thermal Conductivity Materials
For High-Power Chips and Communication Modules
High thermal conductivity of 8.0–30.0 W/m·K
Fills gaps between components and heat sinks
Available with different thicknesses and compression characteristics
Optical module power is rising fast — TIM selection must now balance thermal performance with optical surface cleanliness. This article explains the siloxane contamination mechanism and offers non-silicone pad/putty selection guidance.
Discuss Your Networking Equipment Thermal Management Needs with Us
Whether your application involves high-speed network switches, enterprise routers, 5G/6G base stations, or optical communication equipment, LiPOLY provides professional material selection and customized technical support based on your thermal and reliability requirements.
support_agent
Technical Support
Evaluate the best thermal solution
trackpad_input
Material Selection
Quickly identify the right material combination
dashboard_2_edit
Custom Solutions
Create material solutions tailored to your needs.
Thermal Solutions Expert
SHIU LI TECHNOLOGY CO., LTD.
Taoyuan City, Bade District, Yongfeng Road, No. 435